Part Finder

Plain Caliper - Front Standard Left Hand Side

Part #
4060
In Stock
$69.00
1970-1972 Chevy Chevelle, 7/16" x20 Banjo Bolt, Sold Individually
The CPP Plain Caliper - Front Standard Left Hand Side (Part Number 4060) fits 1970-1972 Chevy Chevelle. Features a 7/16" x 20 Banjo Bolt. Sold individually. Ideal for precise fit and reliable performance.
More Information
Product Name Plain Caliper - Front Standard Left Hand Side SKU 4060
Front Caliper Piston Qty 1 Front Calipers Loaded Yes
Material Cast Iron Finish None
Front Caliper Piston Diameter 2.95 Bleeder Screw 10mm x 1.5
Brake Pad D52 Prop65 Yes
Brand CPP Caliper Location Front
Fitting End A 7/16 x 20 Banjo Bolt
Write Your Own Review
You're reviewing:Plain Caliper - Front Standard Left Hand Side
Your Rating
Customer Questions
Can you put brake calipers on wrong?
Yes, on some vehicles, the caliper can be installed on the wrong side. Because you can't bleed off the air that builds at the top of the caliper, the bleeder screw will now be on the bottom, and you'll never have a firm pedal.
Why don't my brakes work after adding calipers?
One of the main reasons why your brakes don't work after adding calipers is because you have air in the line and need to bleed the brakes at all four wheels.
What happens if you don't grease calipers?
If all the friction points of your caliper go unlubricated the pads will not slide from side to side easily and you will more likely have pulsing brakes and intermittent brake drag noises. The drag noise is usually more apparent at low speeds.
Can dirty brake fluid cause calipers to stick?
Dirty brake fluid can result in the calipers sticking, cause uneven braking, and even in some cases cause brake failure. It's important to regularly check and maintain your brake fluid to ensure the safety and performance of your vehicle's braking system...
How do you reset a brake caliper?
You can reset your brake caliper by pushing a flat blade screwdriver in between the brake pads and twisting it. This will separate the brake pads and, in turn, push back the pistons to the reset position
Did you find what you were looking for?

There are no tech documents.

There is no Attribute Value.

Compare(0)