CPP Tools Guide
The right tool can make a classic car or truck project cleaner, easier, and more professional. CPP Tools are selected to help builders, installers, and do-it-yourself enthusiasts complete brake, steering, suspension, chassis, and restoration work with more confidence.
Whether you are flaring brake lines, bleeding a brake system, checking driveline angles, installing suspension parts, or setting up a classic vehicle in the shop, CPP offers specialty tools designed to support the way real builders work.
CPP brake flare kits, double flaring tools, flare kits with deburring tools, master cylinder bleeder kits, pressure bleeding tools, brake bleeding syringes, tube cutters, and brake line benders. These tools are useful for building, repairing, or upgrading brake plumbing during disc brake conversions, master cylinder swaps, and custom brake line installations.
| Tool | Part # | Use |
|---|---|---|
| Brake Pipe Flaring Tool Kit, 3/16 in. to 3/8 in., Single and Double Flare | BPFTK | Creates single and double flares for brake lines. |
| CPP Brake Flare Kit | CPBFT | Vise-mounted brake flare tool with dies. |
| Double Flaring Tool Kit | CPDFTK | Makes 3/16" and 1/4" double flares. |
| Double Flaring Tool Kit with Deburring Tool | CPDFTK-PDT | Double flare kit plus pipe deburring tool. |
| Bleeder Kit | CPP-BK | Used for master cylinder bench bleeding. |
| Brake Line Bender | CPBLB | Bends brake line tubing for clean routing. |
| CPP Deluxe Dual Flare Hand Tool Kit with Tube Cutter | CPDFT-D | Dual flare kit with included tube cutter. |
| CPP 8 Piece Double Flaring Tool Kit with Tubing Cutter | CPDFT | Double flaring kit with tubing cutter. |
| Pressure Bleeding Tool | PBT | Pressure bleeds brake systems. |
| CPP Double Flaring Tool Kit | CPFTK | Double flaring kit for multiple line sizes. |
| Brake Bleeding Syringe, Curve Tip | CP0105 | Used for brake fluid bleeding or fluid transfer. |
| Brake Bleeding Syringe, Straight Tip | CP0108 | Used for brake fluid bleeding or fluid transfer. |
| Plastic Prop Valve Tool | PV-TOOL | Holds the proportioning valve centered during brake bleeding. |
| Small Tube Cutter, 1/8" to 5/8" Diameter | TCB-S | Cuts brake line or small tubing. |
| Speed Bleeders, 10mm-15 | SB1015 | Helps make brake bleeding a one-person job. |
| Speed Bleeders, 5/16"-24 | SB51624 | Helps make brake bleeding a one-person job. |
| Speed Bleeders, 1/4"-28 | SB1428 | Helps make brake bleeding a one-person job. |
| Speed Bleeders, 10mm-10 | SB1010 | Helps make brake bleeding a one-person job. |
| Speed Bleeders, 3/8"-24 | SB3824 | Helps make brake bleeding a one-person job. |
| Angled Nozzle Filler Bottle, 8 oz | BFB | Adds or transfers brake fluid in tight areas. |
| SAE Flare Nut Wrench Set, 3 Piece Set | W350 | Tightens and removes brake line fittings without rounding them off. |
The right suspension and steering tools can make the difference between fighting the job and getting it done with confidence. CPP’s Suspension and Steering Service Tools are designed to help builders, installers, and weekend wrenchers handle common front-end service tasks with better accuracy and control.
From ball joint presses and coil spring compressors to tie rod tools, angle finders, spanner wrenches, and power steering diagnostic equipment, these tools help take the guesswork out of suspension upgrades, steering repairs, alignment prep, and chassis setup. Whether you are rebuilding a classic truck front end, dialing in a performance suspension, or troubleshooting a power steering system, CPP gives you the specialty tools needed to work smarter, safer, and cleaner.
| Tool | Part # | Use |
|---|---|---|
| Upper Control Arm Knock Out Tool, 1989–2002 GM Truck | CP24210 | Removes factory alignment inserts from GM truck and van control arms. |
| CPP Angle Finder Tool Large | CPPAFT-L | Magnetic-base angle finder for checking suspension, driveline, and setup angles. |
| CPP Angle Finder Tool Small | CPPAFT-S | Compact magnetic-base angle finder for setup and measuring work. |
| GM Power Steering Flow and Pressure Diagnostic Test Kit | PSTESTER | Tests GM power steering pump flow and system pressure. |
| Multi Angle Spanner Wrench Set | MASPAN-K | Used for adjusting spanner-style components, including suspension-related hardware. |
| Small Tie Rod and Pitman Arm Tool | STRP | Removes small tie rod ends and pitman arm connections. |
| Large Tie Rod and Pitman Arm Tool | LTRP | Removes larger tie rod ends and pitman arm connections. |
| Coil Spring Compressor Tool | CSC | Compresses coil springs for front suspension service. |
| Ball Joint Press Tool | BJT | Presses ball joints in and out during suspension rebuilds. |
Good fabrication starts with good measurements. CPP’s fabrication and measuring tools are built to help take the guesswork out of custom brake line routing, tubing work, driveline setup, suspension adjustments, and wheel fitment checks.
From tube cutters and benders to angle finders, bolt circle templates, and axle shaft cutting guides, these tools help builders work cleaner, measure smarter, and get the job done with more confidence. Whether you are plumbing a brake system, setting up suspension angles, or laying out custom tubing, the right tool can make the difference between fighting the project and finishing it right.
| Tool | Part # | Use |
|---|---|---|
| CPP Angle Finder Tool Large | CPPAFT-L | Large magnetic-base angle finder for checking suspension, driveline, and setup angles. |
| CPP Angle Finder Tool Small | CPPAFT-S | Compact magnetic-base angle finder for measuring setup angles in tighter areas. |
| Aluminum Axle Shaft Cutting Template, Each | CPASCT | Ford 9" template used for axle shaft cutting layout. |
| Brake Line Bender | CPBLB | Makes tight, clean tubing bends up to 270 degrees. |
| HD Tube Bending Tool | TBT-HD | Heavy-duty tube bending tool for fabrication and tubing work. |
| Triple Tube Bending Tool, 90 Degree Bend | TBT-90 | Bends 1/4", 5/16", and 3/8" tubing up to 90 degrees. |
| Triple Tube Bending Tool, 180 Degree Bend | TBT | Bends 1/4", 5/16", and 3/8" tubing up to 180 degrees. |
| Small Tube Cutter, 1/8" to 5/8" Diameter | TCB-S | Cuts small tubing, including brake line and similar tubing sizes. |
| Large Tube Cutter, 1/8" to 1 1/8" Diameter | TCB-L | Cuts larger tubing up to 1 1/8" diameter. |
| Bolt Circle Template, Plastic | CPBCT | Helps identify or check wheel bolt circle patterns. |
When you are building, restoring, or upgrading a classic car or truck, choosing the right parts can make all the difference. From brakes and suspension to steering, fuel systems, and specialty tools, every project has its own goals, challenges, and fitment needs. That is where CPP Tech Support comes in.
Before you order, CPP’s experienced tech team can help you choose the right kits, components, and tools for your specific project. Whether you are upgrading to disc brakes, improving steering response, dialing in suspension, converting to power steering, or replacing worn-out components, CPP can help guide you toward the correct parts for your vehicle.
Not sure which components fits your project?
Need help choosing a booster, master cylinder, proportioning valve, steering box, control arms, coilovers, or install tools? CPP Tech Support can help take the guesswork out of the process. The goal is simple: help you get the parts that fit, work together, and match the way you want to build and drive your vehicle.
CPP can also help customers choose the right tools to complete the job.
From brake line flaring tools and bleeder kits to suspension, steering, fabrication, and measuring tools, the right equipment can make your installation cleaner, easier, and more accurate. Whether you are working in a home garage or a professional shop, CPP can help point you toward the tools that make sense for your project.
CPP support does not stop after the sale.
Once your parts arrive, CPP’s tech team is also available to help with installation questions. If you need help understanding how a kit goes together, how components are designed to fit, or what steps to follow during installation, CPP can help you work through the process. From brake conversions and steering upgrades to suspension installs and setup questions, CPP’s after-sale tech support is there to help customers install CPP products with more confidence.
CPP’s Success Center gives customers a place to connect with the tech team by phone or email for support and product guidance. Every classic build is different, but you do not have to figure it out alone.
For help with your next project, visit the CPP Success Center, or contact CPP Tech Support, and make sure your ride is CPP equipped.