Crossmembers FAQ
Does your CPP crossmember bolt to the factory location?
Our CPP crossmembers are designed for vehicle specific frame, but the length of the transmission will dictate the location of where the crossmember will bolt up.
Is the E3748M2-X a bolt on cross member?
Yes, the crossmember is bolt in, you’ll need to drill some of the holes when bolting it in. The spring hat needs to be welded in.
What engine mounts are welded on the E6267M2-DLX crossmember?
Those are designed for a Chevy small block, they’ll work with a big block using 2 of the CP-1114G engine mounts, if you have an LS use the LS1-KU-P plates.
Did you find what you were looking for?
Categories: