Skip to the beginning of the images gallery

Plain Caliper w/ E-Brake - Right Hand Side, Rear

Be the first to review this product

Part #

4138

In Stock

$99.00

1985 Cadillac Seville, 10mm x1.5 Banjo Bolt, Sold Individually

Contact Support . Terms & Conditions

Product Overview

The CPP Plain Caliper with E-Brake - Right Hand Side, Rear (Part Number 4138) fits the 1985 Cadillac Seville. It features a 10mm x 1.5 Banjo Bolt. Sold individually.

Product Specs

More Information
Product Name	Plain Caliper w/ E-Brake - Right Hand Side, Rear	SKU	4138
Front Calipers Loaded	Yes	Material	Cast Iron
Finish	None	Rear Caliper Piston Diameter	2.125
Rear Caliper Piston Qty	1	Rear Calipers Loaded	Yes
Bleeder Screw	10mm x 1.5	Brake Pad	D154
Prop65	Yes	Brand	CPP
Caliper Location	Rear	Fitting End A	10mm Banjo Bolt
Product Type	Calipers

Ratings & Reviews

Write Your Own Review

Only registered users can write reviews. Please Sign in or create an account

FAQ (6)

Customer Questions

i had someone install 4138/4138rear calipers w E-brake-RH -plain LH on certain applications ( please explain certain applications. for some reason the E- Brake springs and hardware was not installed, also can the E-brake hardware be installed after the calipers are installed ? is there any installation instructions i can access?? thank you

Hello! We do sell the spring and lever, but I am not sure if you will need anything. Unfortunately we do not have an instructions sheet on assembly, but we do have a video showing how to adjust he the parking brake and it does show how to remove and ...

Can you put brake calipers on wrong?

Yes, on some vehicles, the caliper can be installed on the wrong side. Because you can't bleed off the air that builds at the top of the caliper, the bleeder screw will now be on the bottom, and you'll never have a firm pedal.

Why don't my brakes work after adding calipers?

One of the main reasons why your brakes don't work after adding calipers is because you have air in the line and need to bleed the brakes at all four wheels.

What happens if you don't grease calipers?

If all the friction points of your caliper go unlubricated the pads will not slide from side to side easily and you will more likely have pulsing brakes and intermittent brake drag noises. The drag noise is usually more apparent at low speeds.

Can dirty brake fluid cause calipers to stick?

Dirty brake fluid can result in the calipers sticking, cause uneven braking, and even in some cases cause brake failure. It's important to regularly check and maintain your brake fluid to ensure the safety and performance of your vehicle's braking system...

How do you reset a brake caliper?

You can reset your brake caliper by pushing a flat blade screwdriver in between the brake pads and twisting it. This will separate the brake pads and, in turn, push back the pistons to the reset position

Did you find what you were looking for?

Your question:

Your name:

get notification on email when the answer is ready

Your e-mail:

Vehicle Applications

Tech Resources

There are no tech documents.

Products Included In This Kit

There is no Attribute Value.

We found other products you might like!

Front/Rear Disc Brake Kit w/ Booster for OEM Stock Spindles for 1955-1957 Chevy Full Size 5x4.75, 10/12 Bolt Rear End

1955-1957 Chevy Full Size, 5x4.75, 10.75" Front, 11" Rear Rotor, 10/12 Bolt Rear End

Product Takes 7 Days to Ship

Part # 5557FRBK-S-1012

From $429.00

To $1,372.00

Add to Wish List Add to Compare

Front/Rear Disc Kit w/ Booster Kit, 2" Drop Spindles for 1955-1957 Chevy Full Size 5x4.75 with 10/12 Bolt Rear End

1955-1957 Chevy Full Size, 5x4.75, 10.5" Front, 11" Rear Rotor with 10/12 Bolt Rear End

Product Takes 7 Days to Ship

Part # 5557FRBK-D1012

From $444.00

To $2,025.00

Add to Wish List Add to Compare